The X2D replaced the X1 Carbon in Bambu's consumer lineup (April 2026). Rather than extend the high-end single-nozzle formula, Bambu pivoted the X series toward multi-material: the X2D carries a shared-toolhead dual nozzle, keeps the lidar and the heated chamber, and lands at a price below the X1C's launch.
Above the P series (single nozzle), below the H series (dual nozzle, large format, laser). The X2D brings the main benefit of dual extrusion — separating model and support — into an affordable desktop size.
In brief
The X2D is for those who want flawless supports or a second material (TPU, soluble) without going large format. Desktop volume, a 65 °C heated chamber, lidar as standard for inspection and calibration. Budget ≈ $649 alone, ≈ $899 as a Combo with the AMS 2 Pro.
Spec sheet
| Build volume | 256 × 256 × 260 mm |
| Motion | Enclosed CoreXY · shared-toolhead dual nozzle |
| Left nozzle | Direct drive, up to 1,000 mm/s (fast, TPU/precision) |
| Right nozzle | Bowden, ~200 mm/s (support / 2nd color) |
| Nozzle (max temp) | 300 °C |
| Heated chamber | up to 65 °C (active) |
| Sensors | Lidar as standard (first-layer inspection, flow calibration) |
| Multicolor | AMS 2 Pro (active drying) · up to 16 colors |
| Indicative price | ≈ $649 (alone) · ≈ $899 (AMS 2 Pro Combo) |
The shared dual nozzle
Like the H2D, the X2D houses two nozzles on one toolhead (mechanical switching) — it isn't an IDEX with independent carriages. But here the roles are asymmetric:
- Left nozzle — direct drive, fast: the "main" nozzle, comfortable with TPU and detail.
- Right nozzle — Bowden, slower: meant for support material (clean removal) or a second color.
The appeal: dedicated-material supports that detach cleanly, and a second material, without the heavy purging of a multi-color single nozzle. For true multicolor (4+ shades), though, you're back to the AMS and its waste.
The X1 Carbon legacy
The X1 Carbon built Bambu's reputation: enclosed 256 mm CoreXY, lidar, AI monitoring, hardened-steel nozzle, impeccable quality. It was pulled from the consumer lineup in April 2026, but remains extremely common and perfectly viable — fully supported by Bambu Studio and the AMS. A used X1C at the right price is still a great buy if the X2D's multi-material doesn't interest you.
Take the X2D for the dual nozzle (clean supports, 2nd material) and the price. Keep or buy a used X1C if you want proven high-end single-nozzle reliability for less.
Limits
- Slow right nozzle: Bowden and ~200 mm/s, it's mainly for support, not fast two-color production.
- Limited right nozzle: Bowden and slow, mainly for support — less versatile than the H2D's two direct-drive nozzles for heavy dual-material.
- Multicolor waste (4+): beyond the model/support duo via the AMS, purging returns.
- Closed ecosystem: like the rest of the Bambu range.
Who's it for?
The X2D is for anyone wanting flawless supports and a second material in a desktop size, with lidar and a heated chamber. For a cheaper enclosed single nozzle, see the P1S/P2S; for dual-nozzle dual-material and laser, the H2D. It's all placed in our Bambu Lab lineup guide.
The X1 Carbon reinvented around multi-material: clean supports and a second material, on a desk, for less than before.